Skip to main content

Power supply: Z1000: TIU Rev L: Software V6.1 on both TIU and Remote: not WiFi enabled (handheld remote only): powered through fixed voltage in: red light flashes one time when powered on: track powered by fixed voltage out.

History:  been working fine for several years: 4 engines on layout: dumb move (when trying to tether the remote I connected the cord from the remote to the AIU port on TIU): tested a Lionel Lion chief engine for a buddy (uses 18v fixed on track) with NO DCS engines on track:

Problem: TIU address not found by remote when Read button selected. Also and not surprising no DCS Engines found.

Troubleshooting: reset both TIU and Remote: changed TIU number: deleted and re-added TIU (red light always flashed once never changed)1: jumpered Fixed Power In to Fixed Power In 2 and track to Fixed Power Out 2 no change: powered the unit with the external power connection: opened unit and checked fuses: tethered the remote the right way and have the same problem: issue not identified:  

Is there anything else I can do to get this working again or am I looking at sending it to the shop or buying a replacement?

Does anyone make new TIUs these days?

Thanks,

LAD

Original Post

Add Reply

Post
This forum is sponsored by MTH Electric Trains

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×