I just purchased a K-Line swing bridge (K-42439) for use on our club display layouts. It only is the bridge, no controller, or instruction sheet.
Does anyone know how it is controlled, or have a wiring diagram they can share?
Any information would be appreciated.
Thank You
Replies sorted oldest to newest
It looks like Lionel will have the manual, email them as you can pull up info online with Lionel's name attached to it, even a site that advertises a manual but there is no manual. One ad said, "Flip the switch" and open the bridge, so sounds like maybe a DPDT center off toggle and 3 wires, a common and open and close leads.
CALNNC
Thank you for the reply.
I did try putting 12 v dc onto the pins in the connector, but got no response.
There is a small PC board with resistors & diodes inside the housing, so I was hoping for some more information before attempting anything else.
Access to this requires an OGR Forum Supporting Membership
