Skip to main content

I want to recognize a friend with a building on my layout. The motor cycle shop is too large for my space. I found the diner and will be modifying that to be a shop. One major thing I want to do is put my friends name on the vertical sign. The sign is illuminated. I took it apart it’s two pieces of a clear plastic with a diode in between. Then the Diner sign  is applied. I was looking for an edge to peel the diner off but I can’t find one. I can’t just cover it because the light won’t shine through. Has anyone attempted doing this? Any ideas on how to move forward?

Original Post

Replies sorted oldest to newest

116938A4-69FE-4E99-9761-C2E530C56AEAI used Word and a bubble jet printer to create the replacement sign. I printed it on vellum paper from Evans Designs. I grabbed a photo of a motor cycle shop interior off the internet and replaced the diner interior. I added a motorcycle and figures. Next step is installing it on the layout. 0CCEB2A0-B9E0-4438-8DB8-8BBC5FAF8D94308BAB8B-B5EB-4E04-8F50-8191F20169FA722BE689-4EFF-420A-A1C5-D262A5F1FC47

Attachments

Images (4)
  • 0CCEB2A0-B9E0-4438-8DB8-8BBC5FAF8D94
  • 308BAB8B-B5EB-4E04-8F50-8191F20169FA
  • 722BE689-4EFF-420A-A1C5-D262A5F1FC47
  • 116938A4-69FE-4E99-9761-C2E530C56AEA
Last edited by pennsyfan

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×