Skip to main content

1 reply

LCS - ASC question.

EE Eric EOGR Forum Member
I was about to wire up my DZ1000 switches to 2 TMCC ASC's. With LCS is there any benefit of the LCS ASC's vs. the older TMCC ASC's? I see that you can use the SER2 to convert the signal of the older ASC's. I don't have LCS yet but am starting to look into it. I would also want to use a BPC too.
Original Post
SM Steve MussoOGR Forum Member SUPPORTING MEMBER

No benefit that I've found. If you already have the ASC's wire them up and use them using a SER2.

 

The BPC is a different story. The new one (BPC2) is very different than the original. It has two groups of four outputs each. The old one had a few different ways to wire it up for your particular needs. In conventional it was good for bringing a train out of a yard and sending it to different tracks using the same power source. In command it's not needed.

Add Reply

Views: 144
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×