LED Connections

Don't know how to ask this question but here goes!

Bought 3 buildings with Led Lighting , two have the wire(s) for a connections and one has a connector on the wires that look like they will plug into the item pictured below. Woodland Scenics Just Plug Lighting System Lights and Hub Set

This item is from Micro Mark.

I need to get the connectors to attach to the wires on the building and then connect the wires to the item"Just Plug" and then to the transformer. I have installed lights on several buildings but not LED.

You can see, I am a real novice and could use and appreciate all comments.

Brent

11/10/167:23 PM

❤️ 1

Original Post

stan2004OGR Forum Member

That's the "Just Plug" lighting system made by Woodland Scenics. As I understand it they really want you to use their LEDs rather than splicing in your own. But if you know what you're doing I suppose you could cut one of their Extension Cables to access the bare wires...or perhaps use a so-called Linker Plug. If your buildings use traditional lamps (not LEDs) you'll need to do some more research as I don't think the light hubs are capable of the higher power of incandescent bulbs. You might also do an OGR search on Just Plug as there have been several threads about the system.