I know you remove the whistle and fill the smoke unit with smoke fluid using the funnel that comes with the train, but--which hole do I fill? The hole from whence the whistle assembly comes, or the smaller hole right next to it that is covered until you remove the whistle assembly?
Thanks
Replies sorted oldest to newest
not to be rude but I could not find the manual for your engine without the 6-xxxxx
The hole to the right
I have two of these. Fill it through the larger hole from where the whistle assembly comes from. If you have any problems with the smoke not coming out you might have to return to Lionel, After a short time both of mine stopped and I had to return both for repair, seems there is a problem with a gasket that stops the fan. Good Luck. Also always try blowing in the holes first.
Bill,
You fill the hole that the whistle comes out of.
Good luck with the engine. Its a beauty but mine broke 4 times. I have sent it to Lionel 3 times for repair.
I am getting a refund now.
-Mike
Access to this requires an OGR Forum Supporting Membership
