Guys even reinstalling 1.6 did not solve my problem. Here is whats going on.
I am running a lionmaster challenger on the inside loop and a lasup of two legacy sd70 macs on the outer loop. The lionmaster challengers head light is flashing violently. The lashup sd70 macs headlights are not and are acting normal. Also my new pnp command culvert loader and unloader which are hooked to the 18v track power. Their strobe lights are flashing violently. I unpluged them both and it made no difference. On my command base no lights are flashing even when turning the red nob on the cab2.
Unpuging the jack from the command base wall wart on back of the command base does not send all the engines flying as one would expect. Plugging the walwart jack back into the base has this effect. everything still has sound but the cab2 has no fuction at all. Lights on loader and unloader stop flashing as does engine headlights. Also tryed shutting down the remote. The remote would not power off holding down the ctc button. Removing one of the fresh batteries which I installed earlier this evening shut it down. Putting the battery back in got the remote working as normal again. It is now turning on and off. Reseting all power to the layout gets everything working again,but only briefly then all the lights start flashing violently again shutting everything down. All engines stop,but still have sound. remote when activated has no function at all. WTH is going on here. I Think my legacy base is falling? What do you guys think.
