I'm looking to pair 022 switch tracks on my layout. I would be pairing a left turn switch to a right turn switch. Also a right turn switch to another right turn switch. Any advice or diagrams would be much appreciated
Thank You
Original Post
Replies sorted oldest to newest
Are these switches going to be used for a siding? If so you may want to add an insulating pin for the center rail about 2 track sections away from the switch. If you put 2 022 switches back to back(switched sections) you need to add a short piece of straight track to keep the outside rail power continuous and put the insulating pins in the outside rails at the switch.
If you won't be using a lot power in your engine I find it best to use the constant voltage plug on the 022 switches.
Lee Fritz
take advantage of the direct power feature, for sure. I have two extra pins if you are in need.
