Skip to main content

Hello everyone and Merry Christmas to you all.

I have the 1990 Lionel 1805 j1e Hudson that was upgraded to EER Electronics and it runs great except going upgrades I have a problem with traction and would like to know if you have any suggestions to correct this issue. It does not have grooves in the wheels for rubber tires but could I still add them and what size? The front headlight won't work. Any suggestions for all of this.

Much thanks,Jerry

Original Post

Replies sorted oldest to newest

You’ll never get a traction tire to stay put and be effective, …..rather, that would be annoying,…..depending where the ERR components were added, you can add a  reproduction weight from the 700E…..part # 700E-147 ….this weight bolts on the gear box of a 700E ( early ) ….however, it does fit in the 18005 ( 1990 700E ) I’ve converted boat loads of Pulmor Hudsons to Pittman, and the ballast weight is a must for the ones with no tire groove….

Pat

Add Reply

Post
This forum is sponsored by Lionel, LLC

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×