Lionel 30K Gallon Tank Cars

Yes, I have done that. You have to decide if you want to keep the Lionel trucks and order NWSL wheels or swap out the trucks. That will determine the ride height.

Some of the newest Lionel models state they will come with kd pads.

Thank you for the quick reply.

Can you tell me what part numbers you used? I see that there are many tread sizes to chose from on the NWSL site. Did you swap out your trucks?

Thanks

Sal

Sal the .145s are good.

On one set I got, they were converted already using the older Weaver metal trucks with home made bolsters.

On the Lionel Vision Tankers, I ordered the NWSL axles for Lionel trucks w/ spinners.

I did order before there were multiple tread sizes available. I believe I got the smaller flanges. I would suggest getting the larger ones if your track or benchwork isn't the best.

http://www.nwsl.com/uploads/chap3_web_03-15-16.pdf

Lionel ‘spinner’ China

33"/145 Shldr roller brg 1/8" x 1.91"axle    8292-4 18292-4

36"/145 Shldr roller brg 1/8" x 1.91"axle    8293-4 18293-4

33"/172 Shldr roller brg 1/8" x 1.91"axle    8892-4 18892-4

36"/172 Shldr roller brg 1/8" x 1.91"axle    8893-4 18893-4

I forget which is the smaller flanged and which size wheels of the four choices? I'll have to go look at my part bin to see.

I do remember ordering a large quantity (with -100 at the end of the part number). I don't see that anymore?

OK, I used 8292-4 .

You reminded me why I didn't convert the rest. I had sold off some axles that I had needed. I forgot to ever order more!

https://ogrforum.com/t...-converted-to-2-rail

The prototypes of these cars will have the 36" diameter wheels.  There may be some value to using the 33" wheels for ride height or coupler height, but they wouldn't be 100% prototypical.  I would suggest the .145" treads.

You may even find the wheel size stenciled on the bottom half of the end of the car.  The prototypes of most any car type typically have specifications for wheels, brake gear, draft gear, and spring groups stenciled on their ends.  Hopefully, if it's included on the model it is accurately done.

Jim