Skip to main content

Does anyone know how to flare out the top pin that goes into the two holes on the 16mm film attachment? My pin falls out as it does not have a topstop and it slips out due to gravity. I tried to bend it but that made it not move freely and use some cutters but was afraid it would cut the pin. Also looked online for part 345-101 for replacement and could not find.

let me know if someone has an idea or a supplier for a new part already attached. Thanks

IMG_0738

Attachments

Images (1)
  • IMG_0738
Original Post

Add Reply

Post
This forum is sponsored by Lionel, LLC
×
×
×
×
Link copied to your clipboard.
×
×