Lionel 350 transfer table and Gargraves track

Maybe the 1122-500 adapter set may work.  This is a set to adapt lionel o-27 switches to super o track

Gargraves makes an 027 and O mating pins, check their website.

Thanks.

This, and while GG and 027 track are pretty close in height, I dont think they're exact, so make sure you shim the low side to the proper height.

My postwar 350 transfer table did not come with the hardware to attach the track. I just shimmed the track to match up with the deck of the transfer table in the locations indicated by the mounting holes in the base.
years later I picked up the hardware packet for the transfer table, but I never used the parts. My current layout is too small for the table, so it is put away,

Thanks for all the replies.

I ended up using paper clips, bent in the same "U" shape as the original metal parts.