I just purchased a 397 Lionel Coal Loader that needs a new belt (saw the thread here on how to replace that) and also will need the plastic coal deflector replaced as mine is torn and very bent. I see that it is riveted in - anyone replaced this? Any suggestions greatly appreciated!
Thanks much.
Dan
Replies sorted oldest to newest
I just purchased a 397 Lionel Coal Loader that needs a new belt (saw the thread here on how to replace that) and also will need the plastic coal deflector replaced as mine is torn and very bent. I see that it is riveted in - anyone replaced this? Any suggestions greatly appreciated!
Thanks much.
Dan
Yes, they do make replacement deflectors and rivets. You can also get a larger
version than the original. I would recommend the larger version since this accessory scatters a lot of coal. Most parts dealers carry both sizes plus the rivets.
Do you know who carries the new version? I tried for a couple of years & couldn't find it anywhere. Even Mike Reagan couldn't find any. Wanted to upgrade my original since it controls the coal much better.
Do you know who carries the new version? I tried for a couple of years & couldn't find it anywhere. Even Mike Reagan couldn't find any. Wanted to upgrade my original since it controls the coal much better.
I must admit that I haven't bought one in several years. There are several dealers
selling the original size Pt. # 397-50- Stanley Orr, George Tebolt, Brasseur & Trainz
to name a few. I have also seen people make their own with some light plastic
and small screws in place of rivets.
The Train Tender (www.ttender.com) lists the belts (397-6) at $9.75 and the original type deflector (397-50) with grommets for $1.00. You might ask Jeff, the owner, if he has or can get the oversize ones.
Access to this requires an OGR Forum Supporting Membership
