Can someone please post a photo from their Gang car of where each wire from the coil goes.
I have studied the wiring diagram and do not understand so I am hoping an actual photo will help me.
There are 4 wires coming from the coil and only one is still soldered in place the rest have broken off their mounting points.
Thanks in advance!!
Mike
The wiring diagram shows it clearer than any picture could:
The double wound field has 4 wires. One set of opposing ends is connected to the brush that is NOT also connected to the center rail pickup. The other set of opposing ends are connected to the terminals on the fiber switch board. It all is laid out clearly in the above diagram.
Access to this requires an OGR Forum Supporting Membership
