Skip to main content

Lionel 6-16983 PRR Well Hole type flatcar.  

This O scale model is a six axle well hole flatcar that is patterned after the PRR F33 flatcar.  The prototype F33 was used to carry oversize loads and is very similar in concept to modern well type container cars.  The Lionel model also includes two reels for loads.

Note: The prototype PRR F33 car numbers were 470080 to 470089. The prototype PRR trucks were Buckeye class 3F-F3 and had a 9 foot wheelbase.

A photo of an HO model of the PRR F33  is also shown.

PRR F33 SCALE MODEL 1PRR f33 470088 PROTO 1PRR F33 FLATCAR PROTO 1

000_0485000_0486000_0487

Attachments

Images (6)
  • PRR F33 SCALE MODEL 1
  • PRR f33  470088 PROTO 1
  • PRR F33 FLATCAR PROTO 1
  • 000_0485
  • 000_0486
  • 000_0487
Last edited by pro hobby
Original Post

Replies sorted oldest to newest

Lionel 6-16983 PRR Well Hole type flatcar with custom oversize load.

Here is a "crated load" that would be typically transported in this type of car. The load is seated in the well and allows for a lower center of gravity. The model also requires chain or cable tie-downs to restrain the load (not shown).

000_0490000_0491000_0492000_0493

 

Here is the "crated load" used with this car. As shown the load fits in the well.  The load could also be used on a depressed center flatcar as well.

000_0542000_0543

Attachments

Images (6)
  • 000_0490
  • 000_0491
  • 000_0492
  • 000_0493
  • 000_0542
  • 000_0543
Last edited by pro hobby

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×