In an effort to keep everyone informed! Lionel was kind enough to provide dealers with this FAQ.
What is the Base3?
a.The Base3 is the latest iteration of the Lionel Command Control base that allows you to operate Lionel command control-equipped trains and accessories.
Will the Base3 operate my Legacy locomotives?
a.Yes, the Base3 is compatible with Legacy, TMCC, LionChief Plus 2.0, LionChief Plus, LionChief, and FlyerChieflocomotives.
What controllers are compatible with the Base3?
a.You can use your existing Cab2 or Cab-1L hardware remotes.
i.For the Cab2, we recommend updating the firmware to the latest V1.70, which can be found on the lionelsupport.com site.
ii.While the Cab2 remote will no longer be produced, the Cab-1L remote will continue to be available.
b.The new Cab3 APP as well as the LCS APP. Limited functionality will be available with the iCab APP as well.
How many controllers can be connected to the Base3 at once?
a.Up to 10 total devices. Any combination of Cab2, Cab-1L, or Cab3 APP.
LCS SER2 Serial Converter (6-81326) provides Base3 compatibility with:
a.MTH TIU
b.TPC300 or TPC400
c.Older Lionel control modules such as the ASC, AMC, ARC, and BPC
d.Base1/Cab1
Other than controlling trains, what else does the Cab3 APP do?
a.Update the Base3’s firmware using Wi-Fi.
b.Backup/restore the Base3’s engine database.
c.Configure the Base3’s Wi-Fi connection.
d.Edit Bluetooth and RF saved engines.
Will the Cab3 APP work on my iPad?
a.The Cab3 APP will be available on Android and iOS smart devices including smartphones and tablets.
Base3/Cab3 FAQ
Base3 –Item # 2208010
February 2022
I don’t have a smartphone. How else can I update and configure the Base3?
a.We will have a PC utility available for download that will interface with the Base3 using either Wi-Fi or the included USB cable. (Not compatible with MAC).
It will have the following functions:
i.Update Base3 firmware
ii.Create and read memory modules for:
1.Base3 engine database
2.Engine specific information
3.Cab2 firmware update
iii.Backup/restore Base3 engine database to a local PC file
iv.Edit Base3 data (name, switch throw rate, Wi-Fi settings, TMCC remote radio channel, etc.)
v.Basic engine control buttons.
Is there a manual I can review for the Base3?
a.The manual will be digital. The website will go live later this year. A quick-start guide will be included with the Base3 that will have the website URL.
How do I use the Base3 to control my conventional engines?
a.The Base3 is fully compatible with the ZW-L, Legacy PowerMaster, and Legacy PowerMaster360W. These allow you to adjust track voltage from a handheld controller connected to the Base3.
I have a large layout. What range does the Base3 have?
a.For Legacy/TMCC, the range is typically up to 100ft from Base to controller.
b.Bluetooth: The Base3 comes with BLE5.0, which has a range up to 100ft. Lionel Bluetooth engines produced before 2021C2 feature BLE4.0, which is limited to a range of about 20ft.
c.RF LionChief: Around 80ft.
**range is reduced by physical barriers such as tunnels, bridges, walls, accessories, etc.**
How do I connect the Base3 to the LCS modules? Do I need the powered Y-cable?
a.The Base3 provides 3 LCS PDI ports, each powering the LCS modules. You do not need the Y-cable. All you need is the LCS module and a PDI cable, which is available in 4 different lengths. For each additional LCS device, you only need an additional PDI cable.
|
|
