Has any one hooked this up with the 990 and the Phanton track. Hoping for some guidance. Thank you, Nick
Original Post
Replies sorted oldest to newest
Hi Nick......what kind of help do you need?
-Pete
Pete, Do you assign it a number as you would a train? I'm going to try and supply power to Lionel tubular tracks with lock- ons on each outside rail one rail + and one rail - before I buy the Phanton track. hopefully that will work to supply power. Thanks,Nick
Yes....you run it in Cab1 mode but you still use your Cab2 to control it. Just put it in program mode, assign it an Engine ID# and put it back into run mode....thats all their is to it. For testing purposes, your idea should work as long as you are supplying one outside rail with + and the other outside rail with -. Directions indicate polarity is not an issue.
Good luck-Pete
Is the sound work house programmed with the same number as the crane and does the sound work the same as it does on the crane work caboose?
Program the Crane Sounds Work House with the same ID as you programmed your Crane so when you operate it, the sounds will be synchronized with the crane movements.
They have different sounds.
-Pete
thank you Pete
Pete, Got a gargraves gantry crane track, and it works like a charm. Nick
nikkog posted:Pete, Got a gargraves gantry crane track, and it works like a charm. Nick
Good job! Thats the best one to use......you don't have to worry about proper widths or inadvertent movement of the track after you install. This has to be the most entertaining accessory Lionel ever came out with...I am playing with this more than running my trains!
-Pete
