I was looking for the part numbers for the interior crew on a Lionel F3. I checked with Lionel and they had the part number for the interior unit, but as I understand it the crew and the "Radio" are separate part numbers. Does anyone know if 610-8134-025 is the complete unit?
Thanks
Mark
Replies sorted oldest to newest
Thanks for the reply I am looking for 3 sets.
I have these 7 crew figures...I think MTH if you want them.
EDIT: THEY ARE SOLD
I can't be sure, but those may be sold out. We hit them hard a year or so ago and they were sold out then.
Rob
I was looking for the part numbers for the interior crew on a Lionel F3. I checked with Lionel and they had the part number for the interior unit, but as I understand it the crew and the "Radio" are separate part numbers. Does anyone know if 610-8134-025 is the complete unit?
Thanks
Mark
There's no such thing as a complete unit under one part number -- you'll need to order the component parts.
610-8134-025 Cab Interior
610-8134-035 Control Stand/Radio
610-8205-014 Figure (two are required)
TRW
Thanks for the reply's. I will see if I can order the parts from Brasseur
The part number for the interior and crew is 6-10-4566-135. Here's a picture of the part:
I have two these in my pets bin. Let me know if you are interested.
Mike
That would be parts bin.
Mike
They'd probably smell if they were in the pets bin! 
The part number for the interior and crew is 6-10-4566-135. Here's a picture of the part:
It looks like that's the interior for F-3s equipped with DC can motors. However, for F-3s with Pullmor motors, what PaperTRW stated above is (I think) correct, that there are three separate parts required for a complete interior.
Thanks BOrunner but I am looking to put these into a PW 2343 and a PW 2379. These look like units for a can motor unit. I did check with several parts dealers for the numbers mentioned above no one has them. I will probably end up fabricating my own.
I may be wrong, but if its a post war horizontal engine there is not room for an interior.Seems like I tried this once. The exception woud be if you put it in the dummy unit and run it up front as some do.
Rob
Thanks BOrunner but I am looking to put these into a PW 2343 and a PW 2379. These look like units for a can motor unit.
Mark, I repaint and add some scale details to PW F units; so please post whatever you find and do.
LOS, if they need a good home, send them my way. Let me know postage via email.
I may be wrong, but if its a post war horizontal engine there is not room for an interior.Seems like I tried this once. The exception woud be if you put it in the dummy unit and run it up front as some do.
Rob
A few years ago, someone made a backdrop out of black foam core and glued the figures to it. The top of the foam core was glued to the top inside of the shell. It seemed to fit and looked pretty good, as I recall.
Sorry guys, someone else took them a few hours ago
Access to this requires an OGR Forum Supporting Membership
