when I power up my GP -7 engine it takes off for a short distance and stops and will not move until I power down the track or reset it and it will do it agene. my other engine work ok
Classic indication of a failure of the tach sensor circuitry. First step is to check for a broken wire as the sensor mounted on the swiveling motor sometimes breaks a wire after a few years. If it's not simply a broken wire or loose connection, my top suspect is, unfortunately, the DCDS motor control board. I've had a couple of bad motor sensors, but most often the DCDS has taken a powder.
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
Access to this requires an OGR Forum Supporting Membership
OGR Forum Supporting Membership
Help support this forum with an OGR Forum Supporting Membership. You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM! A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!
OR
Access the ALL the OGR VIDEO FORUMS ANDover 300 back issues of OGR with a DIGITAL SUBSCRIPTION!