I have a new set of Erie FA 2 units.
Which cover on top of the engine do you have to remove to get to the various control switches and how do you remove the covers without scratching the top of the engine?
I scratched one of these covers years ago on an E7 while trying to remove the cover.
picture below
Thanks,
Richard
Replies sorted oldest to newest
Did you pull up the manual on the Lionel web site? Item number would help.
Hatch at the rear...use your fingernail.
Ok, it’s the rear cover. The instructions don’t mention the cover until they talk about the battery installation.
Thanks
Richard
The hatch on the rear is correct. Under the hatch are the switches as pictured below.
I needed to open my smoke units and stretch out the wicking so it reached the bottom of the fluid reservoir and touched the heating element at the top. I cleaned off any burned wicking on the heating element.
Sincerely, John Rowlen
John Rowlen posted:I needed to open my smoke units and stretch out the wicking so it reached the bottom of the fluid reservoir and touched the heating element at the top. I cleaned off any burned wicking on the heating element.
Sincerely, John Rowlen
That's some smoke volume! How many volts?
Access to this requires an OGR Forum Supporting Membership
