Looking for a little help. I hooked the new 148 to a 2500 switch machine just to show position of switch machine. The colors switch fine, but if the red should show, it does, but the green will pulse on and off very lightly. The same if the green should show, it does, but the red flickers. The turnout it not set up for non derailing. I hooked up the three wires from the 148 one to power, one to the green and one to the yellow wire from the 2500. The lights are leds. I do have a zsruff 1008 relay, thought I might need it, but they don’t have a diagram for the 148.
Any help would be appreciated.
