I ran across a 6-32910, and wonder if there is a secret to making it work? There are only four connections hard to mess up. Any help would be great.
Thank you,
Original Post
Replies sorted oldest to newest
Do you have the manual? I'm assuming you have it wired up and can't get it to work?
Obviously you need the 2 wires for power and the 2 wires for activation running to either a switch or SC-2, etc to activate it.
It's been a while, but I believe you also need to have a bathtub car on the track in the appropriate position I believe for it to allow rotation. There are micro-switches that are activated by the car's wheels being in the right spot. There are LEDs that turn on when the car is in the right position.
Here is video and like Dave said you have to have rail car to activate.
Check this out from Susan Deats on the Rotary Coal Tipple.
Alex
Owner's Manual with wiring on page 4.
I have the Owners Manual, it shows to attach the #1 clip on the lock-on, I don't have a lock-on is + or -.
hobojoe posted:I have the Owners Manual, it shows to attach the #1 clip on the lock-on, I don't have a lock-on is + or -.
#1 is hot #2 is common. You can sort of see it in the sketch on page 4 when you read along with the text.
The #2 wire goes to the lock on spring that is shown with it's "lip" that grabs the outer rail.
Okay, its wired per the instructions. I hit the switch all I hear is a little click. Could the switch be bad, or maybe the unit?
Car positioned on track? LEDs lit? All the protective shipping pieces mentioned in the manual removed?
Car is in position, LED is lit, all 4 pieces removed, plus the screw.
Any help on this. I wired as per manual. No led light coming on when car in position. Nothing happens when I hit button.
Never mind. It works now. Something was wrong with the sensor.
Very cool accessory. enjoy!
Rod
