Is there a technique or trick to replacing the plastic fan module that covers the switches on the top of the unit? Not too difficut to get off, but I am having trouble getting it to snap back into place. Afraid I will break the two tiny tabs on the front of the module. It is really a tight fit.
There must be some easy way to get this back in place. You do have to remove it to program the engine number.
Replies sorted oldest to newest
I would give it a light coat of grease or oil on the ends (points of contact) of the radiator fan module. I have 2 of these locos and both of them are a pain at times.
I would give it a light coat of grease or oil on the ends (points of contact) of the radiator fan module. I have 2 of these locos and both of them are a pain at times.
Thanks for the tip. That worked.
No problem. You're welcome.
Access to this requires an OGR Forum Supporting Membership
