Will the Lionmaster T1 4-4-4-4 (either #5514 or#5511) fit on the Atlas 24 inch turntable? At an advertised over all length of 25 inches, the T1 would be close.
Ken
Original Post
Replies sorted oldest to newest
You would need to know what the wheelbase is-- from the leading wheelset to the last tender wheelset. just speculating, but it probably would fit--
Fec fan;
With the humps Atlas put adjacent to the tracks at each point, the whole engine must fit in the gap. (Possibly excluding couplers)
Then again, a bit of time with a Dremel and some Styrene sheet can alter that issue.
Russell,
The top of the "bumps" on each side of the track are level with the tops of the rails, so this is not an issue. I know it does not look like that in photos, but I own one and that is the way mine is. But thanks for the thought.
Ken
There is some overhang as you can see in this thread: https://ogrforum.com/t...-t1-4-4-4-4-duplexes
It seems it should fit as long as the overhang doesn't snag anything as the table rotates.
