Skip to main content

I posted this on the Scenery forum & did not get any responses

Has anyone had trouble with the lights on the power house?  The flag lights do not work at all & all of my lights are very dim.  The red lights on top of the transformer work like they should.  I can not figure out what is wrong.

Any thoughts would be appreciated

Ken M

Original Post

Replies sorted oldest to newest

Sorry for the late reply, I have been out of town.  My power source was a problem with the school bus maintenance building but that is fixed but I have no idea what is wrong with the lights in the power house.  The voltage at the plug is 4.6 volts & all the lights are dim except for the two red lights on top of the transformer & the lights for the flag do not come on at all.

Thank You

Ken M

Ken M posted:

...

The voltage at the plug is 4.6 volts & all the lights are dim except for the two red lights on top of the transformer & the lights for the flag do not come on at all.

Was the 4.6V reading with the building attached...or is that at the plug with nothing attached? 

What is the make/model of the transformer and/or the Voltage and Ampere ratings stamped on the unit?

Still sounds like a low voltage issue.  I'm not sure what all colors are used in your building but red LEDs operate at a lower voltage than white LEDs.  So if just the reds light up...

 

Tried your suggestion no change in the lights or the flag.  I forgot that the LED that light up the coals cars as the go through the power house work along with the transformer lights.  They always did I just forgot to mention that.  The flag & the lights on the outside of the building use to work also.

Ken M

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×