I saw several older forums but they stop short of what needs to be done to really get into the cross gear box on the M-Jack. I posted a few pictures to show where I am. My problem is the cross travel on the crane is erratic, up- down is fine and clamp is fine. My guess is I have a slipping gear in that gear box. So I pried open the top of the gear box and have popped off the wheel holders on the end. From there, the question begins- how to get into the gear box? the top cover does not have enough clearance to get out of the way, plus it has a wire through the middle of it. the only thing I can see to allow access to the gear box is to remove the screws holding the cross I beams to the main frame- one of them is in the upper left of the picture. am I missing the obvious or is this the next step? Thanks in advance to the Mi-jack experts
Attachments
Original Post