Molex plug on Lionel PH-180

EscapeRocksOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

Does anybody here know an aftermarket source/ part number for the Molex style plug n the end of the 180w Powerhouse transformer?

Thanks in advance.

I am combing thorugh various supply houses, but there are hundreds of pages of connectors.....

12/19/114:20 PM

❤️ 0

Original Post

Replies sorted oldest to newest

Boxcar BillOGR Forum Member MEMORIALIZED MEMBER

I think this might help

http://www.alliedelec.com/sear...ail.aspx?SKU=8630514

http://www.alliedelec.com/sear...ail.aspx?SKU=8630293

Bill

12/19/115:09 PM

❤️ 0

EscapeRocksOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

Bill,

Thank you very much! Helps tremendously.

David

12/19/115:12 PM

❤️ 0

Bob DelbridgeOGR Forum Member

I've seen plugs like that on RC cars, maybe try somewhere like Hobbytown USA.

12/19/115:57 PM

❤️ 0

RalphOGR Forum Member

search the forum about 2-3 months back gunnrunner john gave me the page in the mouser [i think]catalogue as a link. There are male and female, the part i ordered was 0019091032-nd

Allied doesn't carry what you are after.

ralph

12/19/116:08 PM

❤️ 0

RailfanRonOGR Forum Member

Thanks guys I was about to ask the same question.
Ron

12/19/1110:08 PM

❤️ 0

gunrunnerjohnOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

I looked up those numbers a while back, as Ralph says, do a search and you'll find the references. They're standard Molex parts, I happen to have bins of them left over from a project in the 80's.

12/20/119:28 AM

❤️ 0

CAPPilotOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

John,

Are you planning on selling them? I could use 6 to connect between my ZWs and some Direct Lock-ons.

Ron

12/20/1111:49 AM

❤️ 0

EscapeRocksOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

Thank everyone.

I found what I needed at a local electronic's store. I didn't know what to call them. I knew Molex, but not the type name, i.e., 3 position plug or 3 position receptacle.

All is well!

12/20/114:25 PM

❤️ 0

gunrunnerjohnOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

Here's the thread, see my post with the Mouser links for the specific parts.

http://ogaugerr.infopop.cc/eve...952905817#9952905817

12/20/118:47 PM

❤️ 0

HuskerOGR Forum Member

How does the 3 hole molex female connector wire out on the 180 Watt PowerHouse? If I were to connect a 3 pin male molex connector to the PowerHouse and run two wires off of it for AC hot and common; which of the three pins is Common, AC hot, and what is the third pin for? No connect? Assume orientation is pin 1 at angled end and pin 3 is at the flat end.

12/6/129:15 AM

❤️ 0

coveredupOGR Forum Member

see

https://ogrforum.com/t...ansformer-hotneutral

lots of good info there

Chuck

12/10/133:15 PM

❤️ 0

Mike CTOGR Forum Member DIGITAL SUBSCRIBER

There is a cable set, Lionel (6-14194) which also has an adaptor to parallel two transformers. I use this cable assembly to attach two PH 135's to (2) TPC 400's

Note the twisted cable attachment to the right TPC 400, (Silver box). The molex connectors are inside the horizontal cable tray. Bottom of picture.

12/10/134:10 PM

❤️ 1

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!