Happy New Year OGR Forum!
After a couple of months with the loco sitting I decided to run the GE demonstrator to see the fun lights sequence along the frame. Of course it failed to work when we had the family over for Christmas parties. In addition to the charging lights not flashing the horn and bell are not functioning. I am using the most up to date MTH DCS wifi version.
Question is should I do a factory reset or is there another option?
Replies sorted oldest to newest
Reset is an easy try. You can always change the engine ID back if needed after re-adding it.
Start with a feature reset. If no success a factory reset.
I've had the same problem with mine a couple of times if not run in a while. Did you try pressing the HDLT button on the remote to get the lights working?
The charging lights on my RK model are on the marker soft key.
I think the early PS-2 versions required a conventional reset to restore the charging lights for some reason. So try that if the DCS reset does not work. G
According to the MTH website this is Proto3.
Have seen Proto2 engines needing a fully charged battery to restore sounds.
May apply to PS-3 to. No harm in trying a conventional reset. G
I guess I better pull mine out of the box. Haven't run it in over 18 months.
@Kenjr posted:Start with a feature reset. If no success a factory reset.
Feature reset did the trick. Thanks!
Access to this requires an OGR Forum Supporting Membership
