Skip to main content

Hi Guys,

Will the proximity of the Lionel Legacy wifi module effect the performance of the MTH wifi signal.

Mine are only 18" apart, I  continue to have trouble getting more than 2-3 MTH engines to read in active list. I have feeders, lightbulbs etc. MTH still just picks random engines to active list.

Thanks,

Original Post

Replies sorted oldest to newest

Hi John,

Sorry I was not very clear, I had tried that with no difference. The MTH dcs just seems to have a mind of its own. I was trying to determine if when everything is hooked up, would it make things worse, and as you indicated it should not. Everything works fine with the MTH handset I guess I will have to use that and forget the wifi for MTH trains.

Thanks for your help,

What version of firmware is your MTH wifi unit? Does it match the app version? Not sure how long you have had it, but there was an upgrade shortly after the initial release that fixed some problems. I believe they should both be version 1.1, unless I missed an upgrade. I believe having unmatched versions causes problems.

Also others have reported some problems with some versions of some of the smart phones operating systems. I don't recall which ones, but they have been discussed here on the forum somewhere.

Add Reply

Post
The DCS Forum is sponsored by
×
×
×
×
Link copied to your clipboard.
×
×