Hello
Does anyone know the part number for the flywheel barcode sticker for a MTH steam locomotive? Loco is a Pennsylvania B6 (30-1170-1) The sticker came off the flywheel so there is no speed control. Searching MTH website turned up 0 results. Could not find any parts documentation, possibly too old. Any help would be greatly appreciated.
Thank you
Replies sorted oldest to newest
I can send you some, contact me via profile.
The part number with assorted sizes is BE-0000151; $2 from Brasseur, You are going to need to measure the diameter of the flywheel unless Chuck knows the diameter, which he may
.
Danr; Thank you for your reply. I have contacted Chuck.
You can print this on gummed shipping labels and have the tach tape. Just print it at 100%, it's an image of what MTH sends with the upgrade kits for various sized flywheels.
John's suggestion will works great with not much effort. Assuming that you have a printer all you need are labels. I have found the the Avery 8126 (or generic equivalent) work best. There are two labels on each sheet, 5 1/2" x 8 1/2". It will cost you about $8 at Staples, Office Depot, Walmart, etc.
Access to this requires an OGR Forum Supporting Membership
