Hello
I have a PS 2 c&o kanawha 20-3186-1. I completed a factory reset on the engine recently and have now noticed that the illuminated number boards are not working. I am still getting lighting in the marker lights and the headlight. I tried a feature reset and another factory reset but no change. Any suggestions?
Replies sorted oldest to newest
You can try a conventional reset, but number boards not lighting is weird and probably not related to the Reset for a PS-2 3V engine. G
Have you checked in the configuration? Sometimes the number boards are labeled ditch lights in the configuration. It's possible that the reset condition has them off, it's happened before.
Should I just try switching ditch lights to on via the remote and see if that works?
@Peter Frenzel 010119 posted:Should I just try switching ditch lights to on via the remote and see if that works?
That would be my first step.
Not going to work. This is PS-2 3V with board in the tender. So it uses the MUX. The ditch outputs don't go to the engine. The HL, IL/FB combo, Markers normally fed off Engine MUX from a single control input from tender.
Frankly, I am not sure how they handled the Number boards. Possibly it is off the HL Line (3 bulbs).
You can try it but I think your going to have to open the engine shell to see what is going on.
Is the Cab Light and IL on? G
Access to this requires an OGR Forum Supporting Membership
