Multiple WIFI Units

Buddy,

will I have to do that set up procedure every time I power them up?

No, you do not.

Would it be better if I hooked it up to my home wifi network

If you connected to your home network rather than doing what you're doing, you would be able to access the Internet, as well as, any Legacy wifi apps simultaneously with the DCS App.

When I make the connection, one master unit and one slave unit, do I hook them to the TIU’s and do it, or no connection to the TIU’s?  

I'm having trouble connecting the 2 together.  I've followed the instructions.  But, no luck.  When I get to the step where I push the wps button, the light blinks, I then push the wps button on the slave unit and it's not blinking like it should.  Any help would be appreciated.

Buddy

Try using them in opposite modes:  make the current master the slave, and vice versa.  Also, don't keep the button pressed.

I’ve tried that already.  Still can’t get them to connect to each other.  What if I just connected both of them to my home network, would I still need to connect them together?  With them both connected to my home network, both Wifi and TIU’s will be connected to my home wifi.  

I don't know what you mean by "would I still need to connect them together?"  There is no hardwired connection.  If to the home network, they are both set to "home."

When you tried them in opposite mode, was it the same WIU that wouldn't flash, or the other?

Will wifi, and tiu’s both work if connected on my home network?  I won’t have to connect them together as a master and a slave unit if both of them are connected to my home wifi network.

Yes.  Yes.

Ok, If I can’t get them to connect with the master and slave connection.  I will have to connect them to my home wifi connection then.  Thanks for your help!!

Buddy