Skip to main content

Hi everyone. I have two Kline/Lionel TMCC engines. The SD70 CSX and the SD75 SF. I have not used them in about 3 years and am embarassed to say that I can not locate the run/prog and the conv/tmcc switches. I know they are TMCC. There is a battery compartment hatch and a hatch for the vol, signal sounds, reverse, smoke, etc. At least that is how the switches are marked. The smoke and signal sounds work correctly. I do not remeber if these somehow would be in some combination to access the tmcc switches. This is one heck of a senior moment.Frown Any and all advice/help would be apprefciated.

Thanks, Frank
Original Post

Replies sorted oldest to newest

quote:
Originally posted by chessietoni:
Hi everyone. I have two Kline/Lionel TMCC engines. The SD70 CSX and the SD75 SF. I have not used them in about 3 years and am embarassed to say that I can not locate the run/prog and the conv/tmcc switches. I know they are TMCC. There is a battery compartment hatch and a hatch for the vol, signal sounds, reverse, smoke, etc. At least that is how the switches are marked. The smoke and signal sounds work correctly. I do not remeber if these somehow would be in some combination to access the tmcc switches. This is one heck of a senior moment.Frown Any and all advice/help would be apprefciated.

Thanks, Frank



The other switches are usually found under the edge of the frame above the trucks.
Doug, Bill thanks for the replies. Yes, it is the Kline club engine delivered by Lionel. Also, I believe it might have been Davis trains who had me set it up and both of the engines ran fine under TMCC. That was 3 years or so back and, of course, I have since lost the info. At least now I know I am not losing it. SmileThe issue now is to figure out which switch is which. The smoke unit is definitely correct. That leaves the reverse, cruise and sounds switches. Come to think of it, the sounds switch seems to do what it is supposed to. So it looks like the reverse and cruise might be the ones. I will try to run conventional until the weekend when I can set up my TMCC. Again, thanks, guys.

Frank
Post
×
×
×
×
Link copied to your clipboard.
×
×