What are Flash codes?
What is their role in the operation of PS/2 - PS/3 engines?
Where do you get of download them?
And what do you need to transfer them to an engine?
I have the Consumer Loader V 5.0.
I am trying to install a PS/2 5 volt board from a Weed sprayer, into a 10 wheel steamer.
I have tried most of the 5 volt sound files from the MTH website, but no joy, only error messages.
Any help would be welcomed.
Replies sorted oldest to newest
flashing of a PS2 board is done at the factory. All you can do is load matching sound files.
What does the error say?
You need to use a 5V sound file for a 5V board. If you have that, the file should load.
If the board was flashed at the factory for a gas engine Weed Sprayer, would the board set accept a sound and operation file for a Steam engine sound file if it was a 5 volt file?
The normal 5V files should load into any 5V PS/2 board. There are special 5V FLASH boards, but they work with standard engines as well. The 20-2251-1 weed sprayer has a standard 5V PS/2 board.
What errors are you getting when you try to load a sound file?
"Unable to open engine"
If I try to upload the original Weed Sprayer file it loads in about 6 minutes.
Please tell us EXACTLY what sound file you're trying to upload, a link to the MTH page please.
Access to this requires an OGR Forum Supporting Membership
