Brought my new Tie-Jector home (81445), and it won't take any Commands. Put it in PGM and nothing happens. It will run in conventional, but no reactions to TMCC. Put a second engine on the track, set them both to PGM, and only the other engine reacted. Any clues or back to the dealer??
Replies sorted oldest to newest
Thanks for the idea. Watched the video, didn't help. The Tie-Jector won't come out of conventional. When you do the TMCC engine number command, there is NO blinking of the headlight. And after putting it back in RUN, it's still only conventional.
Send it back. If it doesn't program in PGM mode as you describe, it sounds broken.
The radio receiver is probably bad; may be a loose component. If it is brand-new, try to get the retailer to swap it out. If it were a year or two old, I'd say open it up and see if the components are snugged up...but, it's new.
I like these things; don't have one.
Thanks for all the help. I took it back, was given a new one, took it home and it works perfectly. Must have been defective. thanks again to the forum.
Access to this requires an OGR Forum Supporting Membership
