Skip to main content

 Hi my name is Chuck. I'm not new to model railroading as I spent my younger years in HO and the last 20 years in garden railroading, but I am new to 2 rail, O scale.  I want to build a small switching layout in my basement train room for during those cold winter days when I can't play outside.  My equipment will all be DC remote control with battery power the same way my outdoor equipment runs.  I use the Aristo-Craft Revo system and they are making receivers for O scale.

 

I attended a local train show this last weekend and picked up several new pieces of AHM rolling stock for $10.00 each.  I want to replace the plastic wheels with metal wheels, but I'm not sure what to get.  I also want to take the trucks off so that I can remove the plastic coupler and install Kadee's.  How do these trucks come off?

 

I also won a wood caboose kit off of e-bay the other day of a shorty Northen Pacific caboose.  I can't wait to finish putting it together, but I also wanted the scale drawings because I plan on building this same caboose in 1/29th scale for my outdoor layout.

 

Any help or suggestions would be greatly appreciated.  BTW I'm still looking for a Weaver RS-3 and track if anyone has any.

 

Thanks, Chuck 

Original Post

Replies sorted oldest to newest

Chuck:

 

Welcome to 2-Rail O Scale!  You are in for some interesting times ahead and I hope that we all here can be helpful. 

 

I have a design for an industrial switching layout on my blog, it can be found here:

http://2railoscale.blogspot.com/2011/12/industrial-shelf-layout.html  This layout is 32 square feet, the same as a sheet of plywood, but rearranged to fit along two walls.  Radii are tight, but for short locos and equipment it should be OK.

 

10 bucks is about the right price for an AHM car.  If I remember correctly, the trucks are held on by a plastic expansion pin and they should just pull off.  Maybe you'd want to take off the body and help pinch the pin to ease removal and prevent the pin from breaking if you are going to reuse the trucks.  I've used Precision Scale blunt-end wheelsets as replacements.  The under body will have to be drilled for the Kadee draft gear boxes and shimmed to get them to proper height.  Also, if I remember correctly, AHM had an unsightly loop of plastic that held the body on right where the couplers should go.

 

If all of this sounds like too much work, and you can afford a few extra bucks, you can still find older Intermountain and Red Caboose kits at 2-rail shows for as little as $20.  Allegheny Scale Models (www.alleghenyscale.com) had a bunch at the last Strasburg, PA show.  Give them a call, they probably have some left.  These kit build up into a much nicer model plus you have models, like tank cars and reefers, that AHM really did not have. 

 

Weaver RS-3 are quite common at shows and the on-line auction sites, try to find an older unit with the horizontal drive and Pittman motor, the newer dual-motor 'China drive' is not held in high regard.  Track is expensive nowadays, even the older Atlas flextrack (code 156 plated brass rail) goes for $10 a section at shows;' current Atlas even more.  Other choices are Old Pullman and Micro Engineering.

 

TT

Originally Posted by TNT53:

Chuck:

   Other choices are Old Pullman and Micro Engineering.

 

TT


Old Pullman is unresponsive to many of it's customer inquiries over the past several months from the various postings on this subject. I didn't get an answer I know that for sure. I'd say they have become a very questionable choice at this point.

 

Bob

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×