No lights

Before starting to play with sound & chain files, I'd wait for comments from those forumites who have converted PS1 to PS3.  I just upgraded an old steam locosounds to PS3 and had no problems.

Which model and did you swap out the original bulbs for the ones in the kit?  The tender light only comes on in reverse, the headlight should stay on.  Did you turn them off with remote?  Do a feature reset with DCS.

Upgrade kits should have the proper flash code in them now.  Only repair boards sent to tech have to have a code installed.

Or did you load a PS-3 sound file and flash code?  If you did that, that is why lights no longer work.  PS-3 factory boards are a 2 board combo and you can't use the PS-3 Steam flash code on a PS-32 board.

If you load a PS-3 flash code, contact me via e-mail and I will send you the correct PS-32 steam flash code.   G

I did swap out the bulbs. I also installed  a  ps3 sound file and the flash file . I didnt realize at the time that I needed to use ps2 files .  I tried to download ps2 files but all I get is a page of script or it freezes my laptop. I could download ps3 files all right . I hope my mistake is reversible.  Thank you for the reply.

I tried the remote, no results.

 A

The math model # is 20-3024-1

For sound file on MTH Web right click and use save target as feature.  Yes you need to reload the PS-32 Steam Flash file.  If you e-mail me I can send it to you.  G

Everything works great now,my thanks go out to GGG.  He knows what to do!