NW2 Disassembly instructions | O Gauge Railroading On Line Forum

lehighlineOGR Forum Member DIGITAL SUBSCRIBER

Would someone please post the instructions for disassembly of Lionel's Legacy NW2 and subsequent reattachment of the trucks? I find myself in need of doing it, and the original thread is missing. No flames, please, just the instructions.

Thanks!

Chris

LVHR

3/14/188:52 PM

Original Post

Replies sorted oldest to newest

GweedoOGR Forum Member

Ahh found instructions surefire posted. Remove cab (2 screws and 2 handrail tops. Tilt rails slightly backwards to avoid pinching cab) then remove shell (4 screws) Undue large screw on front most board and lift up and away. Tighten truck mount screw underneath, replace board. Remove 4 screws holding speaker enclosure, lift up and towards side with black wires, speaker is free underneath. Tighten rear truck mount screw, replace speaker/enclosure. Replace shell than cab. (Work slowly and check for wires being pinched) Turn over tighten screws for body/cab. Reconnect driveshafts if disconnected. Tighten larger of two screws on bottom of truck securing to the previously tightened mount. I followed these instructions worked slow and it went well. Have to be careful when moving the handrails.

3/15/1810:03 PM

lehighlineOGR Forum Member DIGITAL SUBSCRIBER

Thank you!

Chris

LVHR

3/15/1810:45 PM

GweedoOGR Forum Member

Your welcome.

3/16/1812:20 AM

MartyEOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBERMEMORIAL SUPPORTER

Nice write up! Always good to see folks be part of a solution.

wb47OGR Forum Member DIGITAL SUBSCRIBER

what is a front "most" board? thanks

GweedoOGR Forum Member

Board all the way up front .

3/17/1812:48 AM

Add Reply

Sign In To Reply

<div id="{%=id%}" class="reveal-modal small h-alert-modal-popup" data-reveal>
    <div class="first-modal-focus focus-utility-element" tabindex="0" aria-label="Inside Modal"></div>

<h4 id="{%=id%}_title" class="margin-bottom-10 popup-title"></h4>
    <div id="{%=id%}_body" class="margin-bottom-10 popup-body">
        </div>

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>