Skip to main content

Replies sorted oldest to newest

Flat window glass, spray-painted on the bottom with a deep green camo paint and waves painted on the top with Mod Podge.  Many people like wavy shower-door glass, and it is true that this makes the surface easier to clean.  But with the Mod Podge you can put the waves wherever you need them and modulate their density.

Hey  Muffin,

 

Probubly see ya in a few weeks.

Anyway my favorite way to model water is with envirotex. Mostly because of the reflection and  you can see the bottom contour depth transitions as well as make ripples (like behind a canoe)or splashes where you want.

Piers and rocks look and are submerged as well as the wet look.

 

 

DSC_0741

 

 

 

 

DSC_0857

 

 

 

 

 

 

 

DSC_0339

 

 

 

 

DSC_0340

 

 

 

 

 

 

wff

Attachments

Images (5)
  • DSC_0741
  • DSC_0857
  • DSC_0339
  • DSC_0340
  • wff
Last edited by Patrick H

Beautiful work!

On a previous incarnation of my layout, I used an irregular sheet of 'regular' glass that I sprayed unevenly with Dullcote and placed over a few small circular 'blued' mirrors I placed a bit randomly. I did this purely for the effect it made with the overhead lighting that darkened the glass nicely and sparkled or twinkled on the mirrors.... 

Patrick....WOW!!

 

Guys....I just ordered my "water" a little while ago.  One sheet of Aquatex 60" by 84".  It cost me $217.00 and I will be using it in two scenes.  One will be a 30" by 84" long canal along side the central part of the city.  The other half is going to be my harbor scene in front of the same area.  In order to give that wet look to which Patrick refers, I am using a high gloss spray enamel over the top of the glass and along the edges.  The Aquatex has almost a satin finish so the gloss spray will increase its reflectiveness.  I get started on this project this weekend!!!

 

Alan

Hi Brian...

 

We have two large glass shops in my area and the one I ordered from is having a standard size piece shipped from their supplier to the shop.  Then they are going to cut the glass in the sizes I need.  Aquatex is available in both tempered and annealed with the later being able to be cut.  The price I got includes them cutting it for me...

 

Alan

Originally Posted by Patrick H:

Hey  Muffin,

 

Probubly see ya in a few weeks.

Anyway my favorite way to model water is with envirotex. Mostly because of the reflection and  you can see the bottom contour depth transitions as well as make ripples (like behind a canoe)or splashes where you want.

Piers and rocks look and are submerged as well as the wet look.

Beautiful effect!  Is that a single application/pour or multiple, and how "deep"is the "water"?

I just completed the water portion of my harbor scene and now am laying out the rows of canneries, shippers, etc.  The "water" area is 2 feet wide by 7 feet long.  Once I am satisfied with the locations of each, I will then go back and begin building each of them including a boardwalk / wharf / dock in front and along each structure.  Sorry for the tug, etc. sitting on top of the water...I will use clear silicone to help with placing everything "in" the water.  Also, the large "concrete" bridge supports will be wrapped in what will represent large cut stone or blocks.....still have a ways to go!!

 

Thanks,

Alan

 

 

 

 

 

101_2178

 

 

101_2171

 

 

101_2172

 

 

101_2173

 

 

101_2174

 

 

101_2175

 

 

101_2176

 

 

101_2177

Looking good Alan!
 
 
Originally Posted by Gregg Laiben:
Originally Posted by Patrick H:

Hey  Muffin,

 

Probubly see ya in a few weeks.

Anyway my favorite way to model water is with envirotex. Mostly because of the reflection and  you can see the bottom contour depth transitions as well as make ripples (like behind a canoe)or splashes where you want.

Piers and rocks look and are submerged as well as the wet look.

Beautiful effect!  Is that a single application/pour or multiple, and how "deep"is the "water"?

 

Thanks,

All the pictures are one pour except the first one with the canoe, is 3 pours. Only because i didnt like a section where i had sand .So I painted over the whole thing again. Then the second pour, even though i waited 6 hours to make the ripples ,the next morning they where gone. So the third poured again  i waited 8 hours and they barely showed up but is nice the way they are suttle.

Ive seen others where they use a dental pick and put waves in certain areas of the lake which is also a cool effect.

I would say each pour is about 1/16" (if that)

I used quarter inch Masonite as the surface to paint on.  I found that it is very smooth yet supports the glass quite well.  Also, I experimented by painting the bottom of a scrap piece of glass and then compared it to just sitting the glass on a painted surface.  I preferred the later since to my eyes the water looked deeper...

 

Alan

Hi fellows.  This is no criticism, but by using the shower door glass, doesn't that make the whole pond, lake, river scene look like someone is throwing lots of pebbles in the water all at one time ? 

 

If a high wind is blowing all the time, the water will look like that; but normally, isn't a body of water pretty flat looking - except a running brook or a river.  But that's another look entirely.

 

Corvettte (Paul)

Some of these examples are terrific!

 

One my first ravine I used hydrocast plaster to form a level base. I painted it with acrylic artist colors to give a gradation from dark black green to lighter green and finally tan to simulate a sandy edge. I then poured on W-S Realistic Water. When set I add the realistic water effects paste to form some ripples and eddies behind rocks and the bridge abutment. While I liked the effect, this stuff is expensive and covering the areas you describe wouldn't be wise. 

 Ravine 2 Fascia comp 3

 

For the next ravine I bought 2-part epoxy bar top coating like Envirotex at The Home Depot. It's $24 for 32 ounces compared to 22 for 16 ounces of Realistic Water. I let you know how this works out.

Attachments

Images (1)
  • Ravine 2 Fascia comp 3

I like to use Woodland Scenics "Realistic Water."  I pour it is thin layers gradually and it is about 1/2 inch in places.  It never really hardens - even after a year it is still a bit plastic and soft and looks liquid.  In this photo, you can see I have two guys fishing.  I have dropped in some tiny slivers of white plastic - fish - on an early "level", then poured other layers on top of them.  They really do look like fish.

Slide25

Attachments

Images (1)
  • Slide25

Hi  Lee,

 

I like you idea of layering the water, because of your idea of placing something that looks like fish.  As you were describing the fish I was thinking about layering in old dead logs, leaf debris, and other objects down in the water.

 

GOOD IDEA.  Will file it away so when I design my 1'x10' river I will work those ideas into the river.  Thanks !

 

Corvettte (Paul)

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×