I have a pair of MTH gates that are now flashers only. One needs a board and the other broke the limit set screw housing. I am looking for a comparison between them and the Lionel mainline crossing gates. I'm not quite ready to spring for NJI or Z-Stuff. Do the Lionel gates go any higher than where they are shown in the box? Any advice is appreciated.
Replies sorted oldest to newest
I use Zstuff in operation 7 yrs now and get really heavy use
Have these from Lionel 6-14098. Don't go high.
I've seen some from Azatrax, Tomar and NJI. The catch is you need to use Tortoise machines to lower/raise them. You also need to come up with a flasher for them. Hope this helps.
http://www.njinternational.com/OScale.htm
https://tomarindustries.com/signals.htm
Access to this requires an OGR Forum Supporting Membership
