Skip to main content

1 reply

Prewar Lionel 248 armature

D Dave54OGR Forum Member

I burned up the armature in our circa 1928 248 box cab rectifer engine today.  Not sure what went wrong.  May have been too much current.  Does anyone have any idea where I could locate another armature?  Been looking on line but do not have a diagram for the 248 so do not know what part number is needed.

Original Post
B bmoran4OGR Forum Member

Depending upon the motor, there are different part number makeups for your super motor:

Armature SLS-30 with SLS-7 Pinion used as a pair through 1930

SLS-254-27 as an armature & pinion assembly for 1931 onwards

These are not likely to be well stocked parts and so you may be better off rewinding your armature or harvesting one with crossed fingers from a parts carcass.

Add Reply

Views: 219
Post
This forum is sponsored by Lionel, LLC

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×