Problem with Menards Feed and Seed building lighting

A question. There is a very small push switch,  did you try that ?

I activated the small push button switch several times with no change.

Thanks,

Don

Don,

I just discovered this same problem with mine today. Did you ever find a "cure"?

DGJONES posted:

I finally got around to lighting my Menards Feed and Seed building and none of the lights will light.  The lights on the truck will light when I plug it in but nothing else does.  I removed the base from the building so I could check the wiring and several wires were not connected together, so I tried to figure out their thinking with the wiring and reattach the wires but I still did not get any of the lights to work.  

Has anyone else experienced this issue?  Is there a wiring diagram for the LEDs in this building.

Thanks for the  input,

Don

 

What did you power the building with? Was it the unregulated Menards power supply.

Not exactly sure what you mean by unregulated, but I am trying the Menards model MC90386 4.5v Three outlet one.

Menards SKU 279-4026

Jim Sutherland 062117 posted:

Not exactly sure what you mean by unregulated, but I am trying the Menards model MC90386 4.5v Three outlet one.

Menards SKU 279-4026

Hmmm. When in doubt read the instructions on the box. Ssys it needs 4.5v adapter 289-4006 or 289-4002.

Now to research the difference.

Don,

I just discovered this same problem with mine today. Did you ever find a "cure"?

I was using Menards power supplies, tried both the one with single output cord and triple output cords. 

I was never able to find a cure so I replaced the LED's with 12 volt incandescent bulbs like I use on most of my other buildings. 

Sorry, I am not able to offer any help with Menards lighting.  zi must say I have become frustrated because

How did you get it apart to put bulbs in? I can't get inside 

As I recall, I had to pry the base loose from the building.  I think there are four or five screws but I could never local them until after I pried the base loose.  It took a while being careful not to break the building.

Good luck,

Don