I have a 4 years old MTH Z-4000, its worked fine until tonight, now the left throttle when I turn it on it also powers the right side, even if the right throttle is off. Has anyone seen this behavior or have a solution
Original Post
Replies sorted oldest to newest
I thought I had a similar situation. I have two adjacent track power districts and there we a short between the two. So. When you power up either side the voltage is reflected on the other sides set of meters. To confirm if this is the issue you should disconnect the output wire and power up the z4000 and see if in fact it is what you indicate or it was the issue I was having.
dick
Hi Dick,
Thanks that was the problem - I will try to isolate the short tomorrow.
