I have Barry's book and followed the directions for using the WPA button and for connecting manually through LUCI but I still can't get the WIU on my home LAN. I have a Comcast Gateway. Any ideas what the problem may be?
Original Post
Replies sorted oldest to newest
Brad,
Odds are that it's your router. Can you connect in MTH mode?
Barry,
I contacted Comcast and they sent a refresh signal to the modem and after that I was able to connect by using the WPA button.
I had the same problem, went through all the steps to set up Home Network as I want to have internet on my Note 5 Android while running the MTH app. Was able to Access the LUCi site, identified my local wireless, put in Password, set to WP2 per cable provider, set WIU to HOME, I get a solid TIU light, solid power light, and flashing blue WiFi light--sometimes fast flashing, sometimes intermittent flashing. MTH app advises "make sure your Android device is connected to the same network as the WIU, which it is.. Also tried resetting the router and WPS button on front of Router/modem without results.
Started again and was able to connect in MTH Network--the app saw the TIU and controlled a couple of engines....although I discovered that very many of the functions available on the remotes (I have 3) apparently require an upgrade of the app to function.
Any thoughts on trouble shooting the Home Network connection? Thanks very much
