I have a mth q2 ps2 thats been in storage for a few years, ran fine before storing. I took it out of box installed a new mth battery before ever putting on track. It goes through its start up everything works except it wont move. I did the 1 whistle 3 bells and then the 1 whistle 5 bells both times got the 2 whistle confirmation. You can hear like a relay click when you first give it power to move but just sits there. I have the identical q2, put it on the track runs perfect so that should rule out any power supply problems. I also switched tenders and it did not make the problem one move, but the other tender moved the working one. So i took apart the loco looking for any broken wires or obvious damage to the board, i cant find anything, i even unplugged and reconnected the plugs, still just sits there? I know these questions get asked a million times but i've tried to use everything thats already been posted here before, but cant seem to find a like problem, seems its always in the tender? Any ideas what i can try or what it is? Thanks in advance for any help, marty
Original Post
