PS3 European NORD Start Up Problem

Do signal strength test with engine.  Is it low?  G

Running 8 to 10s George on strength.

If I do a "shut down" on the handheld DCS and cut power - before - the "click" it will start up properly when power is re-applied.

If I do a "shut down" on the handheld DCS and - wait for the "click" then cut the power.....when power is re-applied it will start on it's own.

Lights, smoke, and sounds come on but no movement.

If I do a "shut down" the engine will silence, come back with a "start up" and as long as the operating session lasts (layout powered on) then all is well.

I'm past my level of knowledge on this!

And what does the "click" mean?

Thank You for helping

Dave

Click is the motor relay typically.  You can try reloading software to see if that helps, otherwise you may have to live with it unless you want to change out boards.  You could check the tender board to make sure the signal transformer is clear of any wires.  G

Has it something to do with the watchdog signal?

I can live with it if there is no fix......but if you could explain to me what you think might be happening ...that would go further towards my endless education ........in this hobby!

Thanks

Dave

There is a glitch that can cause PS-3 to miss the watch dog signal.  I have heard software and also hardware on the board.  Hardware makes more sense to me.  Combination of tolerance issues that cause a certain board to miss the watch dog signal.  Otherwise all functions fine.  G

Appreciate your time George.

Thanks

Dave