Skip to main content

hey guys, I noticed that there was no Smoke unit in the PS-3 Genesis Amtrak "bloody nose" heritage unit I got recently. The series is a railking, looks long enough and  there is a exhaust port on top.  so I wondered if I can get parts to make this baby smoke? are there premiere versions that smoke of the Genesis Amtrak?  If the board has the plugs necessary to make this work, I hope to locate the parts to make it work.  I have not pulled the shell off yet to look for spacing for the smoke unit.

 

thanks

Chris

Original Post

I'm not 100% sure about PS/3, but all the PS/2 stuff I've ever put on my test set has had the smoke function enabled, even the sound files that were for units with no smoke.  I suspect it's the same with the PS/3 units.

 

The trick is getting the pins for the connector if the smoke isn't already wired.  Also, you'll clearly have to check to see if the smoke unit would actually fit.  I have a Premier Genesis, and it does indeed have smoke.

Add Reply

Post
The DCS Forum is sponsored by
×
×
×
×
Link copied to your clipboard.
×
×