OK.....I'm trying to run an MTH Crossing Signal (30-11006) off of a DZ-1070.....and have a wiring question.
The easy part: The Red and Black wires of the DZ-1070 get hooked up to power and common/ground respectively.
The MTH Crossing Signal only has two wires: a red one and a black one. The Black will get hooked up to Common.
The Question: What wire from the DZ-1070 gets hooked up to the Red Wire on the MTH Signal? My choice appears to be either the Grey or the White, as Yellow shouldn't be needed. My current guess is the Grey wire on the 1070 should get hooked up to the Red Wire on the MTH Crossing Signal but I thought I'd run it by some experts first.
Thanks for your time.....and Merry Christmas!!!
