Railking SD70ace Pickup Roller

GoshawkOGR Forum Member

The spring in one of my pickup rollers broke. I was hoping someone might know or have some experience that could help. I am looking for the part number for the roller assembly, so I know what to order. Unfortunately, the MTH website is not much help. I tried the directions on the MTH parts website, but the little gears are greyed out. Here is the info about the engine according to the help thread posted by Marty F.

1. MTH Railking, no longer under warranty.

2. The engine item number, 30-4220-1E from the set 30-4220-1.

3. DCS operation

4. Z-1000

5. It was purchased used but, has worked well for the several months I've had it. (not ebay).

4/28/155:45 PM

❤️ 1

Original Post

Replies sorted oldest to newest

rtr12OGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

Call MTH parts and talk to Midge. She will get you the part if it is available. She is very helpful. If someone has the part number, you will probably have to order it from her at MTH anyway unless GGG or GRJ happens to have one?

4/28/159:02 PM

❤️ 0

Marty FitzhenryOGR Forum Member MEMORIALIZED MEMBER

If you can put up a good picture, I will be able to give you a number. I have all the diesel rollers and the photo will work. Take a picture of the bottom also.

4/28/159:51 PM

❤️ 0

SDIV TimOGR Forum Member

Midge from MTH who does parts is sometimes hard to talk to because she is at shows most of the times, but just try talking to her. Hope this helped.

4/28/1510:10 PM

❤️ 0

Marty FitzhenryOGR Forum Member MEMORIALIZED MEMBER

Tim, Midge goes to York shows. She is always at MTH. Midge is a solid person at MTH and never hard to talk to. Posts like yours without any basis of knowledge are annoying to read.