Railsounds 2.5 connector type needed

HotrodderOGR Forum Member

I'm converting an ALCO FA 2033 over to TMCC, and have acquired a used Railsounds 2.5 board. I need to know what type of connectors are being used on this board, in order to make up the cables. Are they the jst-ph 2.0mm, or some other type.

Thanks!

1/19/213:33 PM

❤️ 0

Original Post

Replies sorted oldest to newest

Mellow Hudson MikeOGR Forum Member DIGITAL SUBSCRIBER

H.R.,

Is this the board?

Mike

Attachments

Hide

Images (1)

1/19/215:09 PM

❤️ 0

gunrunnerjohnOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

The connectors are JST-EH 2.5mm connectors, readily available at major parts suppliers, I get them at Digikey.

1/19/215:44 PM

❤️ 0

HotrodderOGR Forum Member

Thanks!

1/19/2111:05 PM

❤️ 0

HotrodderOGR Forum Member

The board is similar to that one, Mike - thanks!

1/19/2111:46 PM

❤️ 0

CLICK HERE and Subscribe to the OGR YouTube Channel!

Railsounds 2.5 connector type needed

Attachments

Add Reply

Skip to main content

Attachments

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!